Skip to content
Home ยป Where to Position Wall Lighting

Where to Position Wall Lighting

The terms used to describe wall lighting can be confusing to comprehend, and it can leave the user unsure when they decide to upgrade or replace the lighting in your walls. This guide can help reduce some of the jargon and assist you in determining the things you require. An extensive guide that covers the different kinds of wall lighting and the possible issues that could hinder you from installing a lighting fixture to the wall, as well as solutions to common issues. This is a great guide for anyone looking to purchase the right wall light, but not sure what. We’ll assist you in determining the proper height to place the light, the lighting that goes dim when a double-insulated light is needed and many more.

Hard Wired Wall Lighting:

Wall lights are known as being hard wired if they are connected to the mains. Also they do not require an outlet, as lamps on tables are however, they are connected to wiring in your home, which could be concealed within the wall or surface mounted.

A lot of wall lights are controlled by the standard Wall switch (like the one that would manage those ceiling lighting) however, not all of them. The method by which the light fixture is switched is dependent on the cables that you have within your home. There are three cables: neutral, live as well as earth cables. One could constitute a switch cable or it could be a continuous live cable. If the cable has been configured to function as an electrical switch cable (and this is an elementary explanation to help you understand and we suggest that you hire a certified electrician) You can make use of your wall switches to control the lights. When the cable has been set up to be a continuously live cable, the light on the wall will remain always on in the event that there is no switch that is directly mounted to the wall fixture.

Click here to buy plaster up and down wall lights.

As mentioned earlier, an electrician is the person in charge of any electrical task, but even the simplest tasks can be more complex than you thought This is particularly the case in older houses, where the so-called ‘cowboys’ could have modified or bypassed the safety procedures. The electrician is educated and licensed to handle all electrical issues. As infants that electricity is extremely hazardous, therefore to ensure your safety as well as that of your family members and guests to your home, it’s worth it to hire an expert electrician to handle electrical problems. Costs are fairly low to alter a light fixture.

Double-insulated wall lights

There may be no earth cable inside the house, in this case, only double-insulated (class 2) lighting can be utilized. Sometimes, this is described under the class I designation.

Homes built before 1970 were finished prior to there was a regulation obligation for an earth cable to be installed, which means that most homes built before 1970 require double-insulated lights. If you’re not sure about the safety of using the double-insulated lighting in all homes and rooms (with the exception of bathrooms) in which case a bathroom-rated model must be used. Lights classed as class 2 have a second layer of insulation to safeguard the live parts which will stop any sparks from hitting the light fitting or switch.

Wall Lights with Switches

Wall lights can be operated independently from other lighting fixtures in the room, as long as they have a switch in the fixture, referred to as an integrated switch. This is useful in the case of trying to create a low amount of light or an ethereal mood. The types of switches include:

Pull Cord A cord switch that you can pull down
Toggle: A ‘joystick’ type switch
Rocker – A rocking off/on switch
An In-line Rocker style of rocker switch that is located along the cable
Dimmer Dial is a switch that is used for dimming the lighting (anti-clockwise) or to increase the brightness (clockwise)

If you don’t require the lighting fixture to be controlled and the light you want has only an integral switch you’ll be happy to learn that a switch-operated wall light is controlled by an outlet switch (just make sure the integrated switch is on in the “on always). If you’re replacing your old fitting for your wall it is recommended to replace the fixture like for like therefore, make sure to include this crucial information in your search.
The best place to put your wall lighting

In living rooms and hallways it is recommended to place your wall lighting between 170 and 165 cm above the floor’s the height.

Ideas for Adding New Wall Lights:

Be sure to connect the cabling to allow the lighting to run because you don’t want discover that there is no wires for the mains to power the new fixtures! Be sure to inform your contractor the way you’d like to use the lights, as they’ll have to ensure that the proper cabling is put in place that allows for the switch to be operated in the manner you’d like it to.

Switching Old Lights to new ones:

The advantage of switching wall light bulbs is knowing that you have access to the mains power wiring and you won’t be left with no power. Remove the old fixture and replaced with a brand new one! Be sure to select an appropriate wall light that can offer a similar or sufficient amount of light, and has the correct mains power cables that can operate the lights in a proper manner (unless you’re replacing one light for another with the same switch arrangement). No matter if you’ve or do not have the proper cable it is possible to find the right wall light. Explore the entire collection of un-switched, switched or double insulated wall lighting on our online store.

How to Place They should be placed:

There’s no right answer for the exact location a wall light should be placed since it’s based on the intended purpose of the use. It is possible for the light to be placed higher in hallways or when your ceilings are tall however, generally speaking you should think about placing the lights 150cm (or sixty”) above the floor for most areas and with a slight exception for the bedroom, where it is possible to place them lower for lighting for your bed. If your lights are wall washers it is possible to place them above the eye level, so that you are not only looking at the interior of the fixture. In terms of the distance between the lights that follow each other We’d suggest between 2.5 three metres for a reasonable spacing however , this is dependent on your personal preferences and the wiring’s suitability. If you’re changing an existing light the cable will decide the location where the new light require to go, however take note that the kind of light you select may be different in terms of cables entry points. The best advice for those who do not want to alter the decor and want to keep it simple is to choose an indoor light that has a bigger mount plate, or backplate that will cover all screws that were previously in place and also be big enough to conceal the missing wallpaper or paint that is usually discovered when the light is removed.

Lighting for Walls that Plugs

If you’re in the market for a light fixture for your wall, but you don’t have the wiring available to connect it then you should consider one of the numerous wall lamps that have the long lead of the plug and switch, which is similar to the floor and table lamps. The downside is that you’ll be in a position to see the cable, which is why it’s a good idea to tie the cable where you can to prevent it from getting messy or choosing one that has fabric cords instead of a plastic. They’re great for reducing the space on your bedside table or to keep walls from channeling. Plug in socket-style wall light are especially useful living in rental homes since they can be hung from this kind of luminaire much similar fashion to hanging the picture.

Dimmable Wall Lights

They are designed to be used on an electrical dimmer switch or have their own dimmer dial that will permit the output of light to be adjusted accordingly. This is perfect for living rooms, bedrooms and dining areas in which the ambient light and lighting is often needed. A variety of lights can be dimmed. It is contingent on several factors. If the light is an option to dim the bulb, this is the most important factor to take into consideration. Certain LED bulbs can be dimmed but since they’re extremely low in watts, make sure the dimmer switch can be adapted to a bulb with a low watt. If the light comes with internal electronics, such as the 12-volt light has an electrical transformer, or and a fluorescent might include ballast (sometimes known as choke) or choke, then the internal components may not work with dimmers. If you’re searching for a dimmer-compatible wall light, check out our range of. Naturally, you could contact us by phone, email, or use our online chat feature to inquire about a problem or for assistance in purchasing an indoor light from experts in lighting, who’s job is to make buying lighting easy.

LED Wall Lights

Wall light fixtures that have LED lighting and energy efficient, as they require the smallest amount of energy to provide the high level of illumination. A few of these fixtures are LED-integrated, meaning that the source of light is built into the fixture. There are some who worry about having replacement bulbs bulb when the bulb dies however LED lights are so durable that the typical lifespan is 15 years or more and therefore an integrated LED eliminates the need to replace bulbs in the first place. It’s not surprising that new technology may be seen as a bit shaky at the beginning of launching into the market however, you might be shocked to find out that LEDs were in use since the 1960’s! It’s only when they’re viable commercially and accessible to everyone that we begin to doubt the long-term viability of these devices.

Alternately, you could utilize LED bulbs for any other light fixture if there’s an equivalent LED bulb it utilizes. Take a look at the variety of retro fit LED bulbs that we suggest in the light bulb section of our online store. We also have LED bulbs that are compatible with light that you can add to your shopping cart.