The best way to make your home look better without spending a lot of money is to start uPVC window painting. This relatively new method has taken the remodelling world by storm. It has a lot of benefits that can make your home look much better from the street. This piece will describe uPVC window spraying, list its benefits over traditional painting methods, show you how to do it step-by-step, and give you advice on picking the best colour scheme to make the most of your project. Okay, let’s begin!
What does UPVC window spraying mean?
UPVC (Unplasticized Polyvinyl Chloride) windows are becoming more popular in modern homes because they last a long time, don’t need much upkeep, and keep heat in. But if these white frames are out in the weather, UV rays, and smog for years, they may start to look dull, faded, or discoloured. There is an easy way to fix this, though: spraying UPVC windows. This new method includes coating existing UPVC window frames with a special material instead of buying new ones. The result is a fresh, new finish that stays looking great for up to ten years with very little work from the user.
Why UPVC window spraying is better than traditional painting
There are a number of reasons why UPVC window spraying is better than traditional painting:
Saving money – Spraying your current frames can save you time and money compared to changing your old windows, which can be quite pricey. Since there’s no real replacement, there’s also no need to move furniture, carpets, or curtains during the installation phase.
More quickly: The whole process only takes two days per house, based on the size of the job, because there is less prep work to do with spraying than with painting. You also don’t have to wait long to get back to normal tasks around the house once it’s dry.
Smaller impact on the environment—Using spray guns to apply a new coat uses less paint, solvents, and brushes than the old way of doing it. Because of this, it makes less trash and pollution that is bad for the environment.
Better coverage and quality: Because high-quality tools and paints made specifically for UPVC surfaces are used, every nook and cranny is fully covered without any missed spots. This is not possible when brushing by hand, where mistakes are more likely to happen. Plus, the final product is smoother and flatter, and it sticks better and lasts longer.
What does it mean to spray UPVC windows?
Professionals with a lot of experience usually follow these basic steps when they spray paint uPVC windows:
Step 1: Get ready and clean up
Before starting the job, the contractor carefully checks each frame for any damage or flaws that could make the process less likely to succeed. They use special cleaning products and tools to get rid of dirt, grime, and dust. If they need to, they sand down rough spots and use the right putty to fill in holes and gaps. After that, all surfaces are dried completely to make sure they absorb the most later.
Step 2: Block off areas that are adjacent
Cover nearby things like walls, doors, plants, cars, etc. with masking tape, drop sheets, or plastic sheeting to avoid unexpected splatters and overspraying. This makes clean lines between the window frames and the rest of the area.
Step 3: Making the surface smooth
A primer is like a base layer that makes the final colour stick better and last longer. It also makes the material smoother and more textured. The area is ready for the next step a few minutes after it is applied.
Step 4: The process of spray painting
Wearing masks, gloves, and shields for safety, trained workers use compressed air guns with spray tips that can be adjusted to spread the chosen colour evenly over the primed area. To avoid drips and runs, they use strokes that meet and keep the pressure steady. Touch-ups are used right away to get rid of any marks that aren’t needed. After they’re done, they wipe off any extra drips.
Step 5: Final Inspection and Talking About It
After finishing the last part, the experts look over the whole set again to make sure everything looks good from all sides. Then, they let the client know that the task was completed successfully and make suggestions for future care routines.
Colour Picks That Make Your Home Look Better from the Street
Picking colours for your UPVC windows shouldn’t just be based on personal taste; they should also fit in with the style of your home as a whole. Here are some ideas that can make things more useful and interesting to look at:
• Complementary shades: Choose tones that are different from the background but still look good together, like black and white, red and cream, green and grey, blue and yellow, and so on.
• Neutral palette: Neutral colours like white, grey, beige, brown, navy, or cream offer classic beauty and a lot of styling options for people who like a more understated look.
• Coordinating with door colours: To make the outside of the house look uniform and balanced, you might want to match the window frames to the front door’s colour or a colour that goes well with it.
In conclusion
To sum up, UPVC window spraying has many advantages, such as lower costs, faster return times, less damage to the environment, and better coverage and quality because it uses specialised tools and high-quality paints. When picking colours for your UPVC windows, make sure they go with the general look of your home by choosing neutral or complementary shades that go with them. For consistency and balance, make sure the window colours match the door colours. We highly advise that you hire licensed professionals to do this job to make sure that chemicals are handled safely and that the job is done well.