Skip to content
Home ยป Are all dampers the same? How do I replace mine?

Are all dampers the same? How do I replace mine?

A coupling damper can enhance the efficiency and accuracy of your braking by aiding in the gradual application of brakes, both off and on. Maintaining the brake system is essential to keep your damper in working in good working order, whether you’re towing for business or personal purpose.

If a trailer damper is damaged the problem is obvious that the brakes on your car “snatch” when they are applied, and you’ll feel a slight jolt to back of the vehicle. Before you replace the damper in itself it is important to check the brake adjustment. Sometimes, poorly adjusted brake shoes or the brake rod can cause the same problems as the damper is failing, but the adjustment of your brakes is more economical.

The failure of dampers can result from various reasons, including braking too harsh or insufficient maintenance. Regular adjustments are required to ensure that the brakes operating properly. Knowing how to change your damper could make a difference in the amount you pay.

Are all dampers equal? How can I replace mine?

Different dampers may not be identical, which means that the process of replacing them can differ according to the coupling you own. Be sure to check the brand and model of the coupling you have before replacing. Here are some guidelines that are applicable to all dampers.

The bellows must be removed. The bellows, also referred to as”rubber boot “rubber boot” or “gater” appears to be an opaque black seal that is attached to the coupling. You can remove it to reach the bolts that hold the head of the coupling.

Take the bolts off. It is necessary to use an abrasive to take off the two bolts on the front and disconnect from the coupling head. After the front bolts are removed, you can remove the bolt in the rear that holds the damper to the housing of the coupling.

Replace the damper of the previous one to the one that is new. Remove the damper that was in its previous location and replace it the new one.

Reattach the coupling. Follow these steps backwards with care. Re-install the coupling heads, reconnect the bolts, and then replace the bellows.

Check the alignment of your brake rod and brake shoes. Check that all looseness has been removed from the brake system.

Verify that it’s working. You can take your trailer for a road test in order to determine if you are still having problems braking when you drive the trailer. If it is then, stop towing the trailer as soon as you are able to pinpoint the problem and correct the issue.

If you don’t have the experience of repairing or replacing coupling components put it to an experienced professional. Do not risk your safety on the road in order to cut costs. In the event that you fail to do so, you could result in criminal charges and responsibility for any harm that occurs by the accident.